Peanut Brittle Recipe | Made in the Microwave! (2024)

FAQs

Why is my microwave peanut brittle too hard? ›

Why is my peanut brittle too hard? Peanut brittle can end up too hard when the temperature gets too high during the cooking process. With a microwave peanut brittle recipe like this one, you may need to adjust the cooking times based on your microwave.

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

For a light roast, microwave on HIGH for 2-1/2 minutes; stir, microwave 2-1/2 minutes longer. For a darker roast, stir and microwave 1 minute longer, in 30 second increments. Season to taste. Peanuts will be crisp when cool.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

#1 - Store in an airtight container

It should come as no surprise that storing your peanut brittle in airtight containers is one of the best ways to store peanut brittle. Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat.

As mentioned in “how to make peanut brittle”, it's very important to move fast after the peanuts and baking soda are mixed in. If not, the peanut brittle will turn out too thick and clumpy. Don't play the guessing game and use a candy thermometer instead. This will ensure your peanut brittle turns out perfectly golden.

Just as in homemade syrup or caramel corn, baking soda causes a unique chemical reaction (basically a lot of rising foam) that is crucial in creating the right texture in peanut brittle. If you make it without baking soda but you will notice the brittle is a bit harder to bite through.

Water: Water helps the sugar completely dissolve. Salt: A pinch of salt enhances the other flavors. If you opt for salted butter, you can skip this ingredient. Peanuts: Of course, you'll need peanuts for this classic treat!

Put it in a pan on low heat and very slowly melt it. Once it begins to melt you can increase the heat a bit. The trick to this is that you have to stir it constantly in order to keep the peanuts from burning. You're going to want to bring it back to 300F, then immediately pour into the prepared pan.

Microwave the nuts at one-minute intervals, stirring in between until evenly toasted and golden. Depending on the amount of nuts you're working with, this takes between three and eight minutes or so, and the results are more even and better-flavored than anything you can get out of a skillet or toaster oven.

How long to microwave boiled peanuts? ›

There are two easy ways to reheat your boiled peanuts: Microwave – place the bag in the microwave for approximately 1 minute until they are hot. You can also heat them in the microwave in a covered container. Stovetop – Bring a saucepan of water to a boil.

Dried peanuts will require a longer soaking time before cooking, so leave them to soak for at least 8 hours or overnight. Soaking the peanuts ensures that they will soften more easily when they are cooked, giving them their delicious texture.

Why is my peanut brittle soft? If your peanut brittle is too soft, you didn't cook it long enough. It's important to use a candy thermometer and cook the sugar mixture until it reaches the hard crack stage.

History. The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

Boil the peanuts for at least three hours. After three hours, take out a peanut and try it – if it's not soft enough, keep boiling until the desired softness is reached.

Place the peanut butter in the microwave, and heat it for 30 seconds. Once the 30 seconds is up, stir the peanut butter to makes sure it's melting evenly. Place the peanut butter back in the microwave for another 30 seconds, and stir again. This will probably take a few rounds to get to your desired consistency.

Peanut butter is naturally high in fat, but that fat is nearly solid at room temperature. In order to soften it up, you need some heat. In my case, I heated two tablespoons in a heat-proof bowl and then stirred like crazy.